• Recente
Componente GM328A Sinal de onda gráfico de onda do transistor lcrrlcpwm módulo eletrônico DIY
zoom_in

Componente GM328A Sinal de onda gráfico de onda do transistor lcrrlcpwm módulo eletrônico DIY

€ 2.00

Quantidade do produto
check Existente

Componente GM328 A Sinal de onda gráfico de onda do transistor LCRRLCPWM Módulo eletrônico DIY Componente GM328 A Sinal de onda gráfico de onda do transistor LCRRLCPWM Módulo eletrônico DIY. Especificação : Tamanho : 75 x 7 2 x 20 mm (L x W x H) Tpye : GM328 A Corrente de trabalho : tensão 9 V, corrente de trabalho estável de cerca de 20m A. Usando a versão 2015 v1. Fonte de alimentação usando a bateria de pilha de 9 V. A interface de download é um programa padrão de 6 arames. A tela LCD da matriz de 12864 pontos, exibe mais abundante em conteúdo, com imagens. O impacto da precisão da resistência relevante usando resistores de filmes finos de 1/1000, e o restante também é usado no resistor de filme 1/100. Função básica : 1. pode detectar automaticamente o PNP, transistor bipolar NPN 2. Identificação automática dos componentes do pino. A capacitância pode ser medida 4. pode detectar o transistor bipolar e o diodo de proteção do MOS Tube. Pode ser mostrado com um valor decimal de dois, resolução de 0,01 ohm. A tensão de quebra reversa abaixo do regulador de 4,5 V pode ser identificada. Tensão do limite do portão e capacitância do portão do transistor do efeito do campo MOS.

Size:
75 x 7 2 x 20 mm(L x W x H)
Tpye:
GM328A
Working current:
9V voltage, stable working current of about 20mA.
Features:
1. Using 2015 V1.12 version of the software. :
2. Power supply using 9V stack battery. :
3. The download interface is standard 6 wire program. :
4. The 12864 dot matrix LCD screen, display more abundant in content, with pictures. :
5. The impact of the accuracy of the relevant resistance using 1/1000 thin film resistors, and the rest are also used in the 1/100 film resistor. :
Basic function:
1. Can automatically detect PNP, NPN bipolar transistor :
2. Automatic identification of the components of the pin. :
3. Capacitance can be measured :
4. Can detect bipolar transistor and MOS tube's protection diode. :
5. Can be shown with a decimal value of two, resolution of 0.01 ohm. :
6. Reverse breakdown voltage below 4.5V regulator can be identified. :
7. Gate threshold voltage and gate capacitance of the MOS field effect transistor. :
8. Can simultaneously measure two resistance and the resistance symbol display. :
9. The resolution of resistance measurement is 0.1 ohm, which can be measured to 50M ohm. :
10. 2uF above the capacitor can simultaneously measure the equivalent series resistance :
value. :
11. Two diodes can be displayed in the right order and the diode symbol, while the forward voltage of the diode is given. :
12. Only a single measurement can be obtained the connection mode of the rectifier bridge. :
Extended functionality (via menu selection):
1. Can produce 1Hz-2MHz square wave signal. :
2. Can produce a fixed frequency, but the pulse width of the pulse wave, a short press key width of 1% increments, a long press the button to increase the width of 10%. :
3. Separate capacitor and function can be started by menu. :
Package included:
1 x Transistor Tester (Battery is not used) :
| :

Best Sellers..